Sanicom 1

Sanicom 1

Commercial Gray Water Drain Pump - 1Hp HDPE - Laundry/Sink/Shower/Bathtub

  • For commercial applications 
  • ↑ 25 Ft ↑ and/or ← 250 Ft →
  • Low inlets for easy installation
  • Can handle multiple fixtures simultaneously
  • Capable of handling up to 194°F
$0.00


Buy Online

The Sanicom 1 drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 25 feet vertical and/or 250 feet horizontal. This model was designed to sustain the toughest applications from commercial...

See more

Sanicom 1 Data Sheet

Dimensions (Height x Width x Depth):

13” x 17” x 9”

Technical features of Sanicom 1
Part number 018
Max. horizontal discharge 25 ft
Max. vertical discharge 250 ft
Voltage 120 V
Frequency 60 Hz
Amperage 8.3 Amps (Max)
Motor 1.3 HP oil-filled thermally protected motor
Capacitor rating 45 microfarad
Operating temperature 194°F
Power cord length 50 inches
Noise level (measured at 3 ft.) ≤ 68 dBA (Lp)
Discharge pipe diameter 1"
Discharge rate at 15 ft @25 Ft : 22 GPM
Discharge rate at 3 ft 50 GPM
Shut-off head 44 ft
Normal running time 4-6 Seconds (Short bursts)
Capacity 2.75 gallons / 10.4 liters
Inlets diameters 2” (sides)
Ventilation diameter 1–1⁄4” vent (top)
Type of activation Pressure switch/ circuit board
Shower/bath base height 10” min
Weight 22 lbs / 10 kg
Certifying agencies CSA (IPC, NSPC), IAPMO (UPC)

Complementary products

Descaler

Descaler

Descaler - 5 L Container for all Saniflo pumps by cleaning and disinfecting -...
Sanicom 1

Sanicom 1

Buy Online