Installing a Saniplus

A photographic record of the step by step installation of the Saniplus macerating unit and toilet. Mouse over the small pictures to view a larger image. We have also created a print version with larger pictures, if you click on the Print PDF button.


An assembly of all parts of the Saniplus An assembly of all parts of the toilet. Cut off the lid of the vent tapping Insert push button into breather opening.
1 2 3 4
An assembly of all
parts of the Saniplus.		 An assembly of all
parts of the toilet.		 Cut off the lid
of the vent tapping.
Insert push button
into breather opening.
This is the vent connection. Place the cover onto the breather.
12 5
This is the vent connection. Place the cover
onto the breather.
Water level mark inside toilet tank. Showing the flapper check valve.
11 6
Water level mark
inside toilet tank.		 Showing the
flapper check valve.
Note: Elbow sitting flush on top of the lid. Extension pipe between toilet and macerator. Connection to the sewer pipe. Elbow pushed onto collar until shoulder hits lid
10 9 8 7
Note: Discharge elbow sitting flush on top of lid. Extension pipe between toilet and macerator. Connection to
the sewer pipe.		 Elbow pushed onto collar until shoulder hits lid.

Saniplus Installation Video Saniplus Installation Video
 Take the time to view our video which demonstrates clearly the correct way to install a Saniplus macerating pump and toilet.

Note: You must have Real Player installed to view the video. Should you wish to Download the Video to your computer, click on the link above and if using Internet Explorer "Right click" and "Save Target As".