Products
SANISHOWER

The Sanishower comes with the pump case only, containing the grey water pump.
Quick Links to:
- Sanishower Installation Instructions (7 pages) *
- Sanishower Technical Data & Drawings (8 pages) *
- CAN/CSA Certification
(to ANSI/UL Standard) *
Specifications:
- Dimensions:
Including pump only
H5¾" x W11-5/8" x D6-3/8" - Motor: Induction Motor
(no carbon brushes or gears), tested over 50,000 cycles. 3600 rpm; 0.2 HP - Electrical supply:
110-115V; 60Hz;
max. amperage 5.5 AMP.
Connect to Ground Fault Circuit Interrupter. - Max. Discharge Head:
Vertically to 12 ft
Horizontally to 100 ft - Gravity Fall on Horizontal installations: 1/4" per ft
- Discharge Pipe:
3/4" diameter - Max. Discharge Rate:
at 12 ft: 14 gal/min;
at 3 ft: 20 gal/min - Normal Running Time:
10–20 seconds subject to installation pipe run - Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene
- Max. temperature: 104°F
- Designed with 2 Inlets to function with:
Hand-basin, Shower, Wet bar or as a Condensate pump

Install a Sanishower wherever you want
The Sanishower is a small gray water pump that may be used to pump waste water away from a shower, hand basin, bar sink, or other fixture.

As a point of interest; quite a few pedicure manufacturers are putting the Sanishower inside pedicure chairs, due to its quiet operation and ease of installation, they have become the choice of OEM’s.
Showerbase for Neo-Angle Shower
We can supply a Neo-Angle Showerbase, ideal for use with our Sanishower gray water pump. It can also be used for a shower connected to the Saniplus or the Sanibest macerating toilet systems.


Sanishower pump – dimensions shown in inches







