Products

Rear-outlet, low flush toilets

Saniflo supplies the toilet bowls and toilet tanks for use with the Saniplus and Sanibest macerating systems. The Saniflush is a rear outlet, low flush toilet.

• It has a spigot outlet and an integral P-Trap.
• The internal diameter of the P-Trap is 3-inches.
• The toilet is a wash down style.
• The toilet is a low flush toilet; it uses 1.6 gallons (6L) per flush.
• The tank is insulated to prevent condensation.
• The zero re-fill fill valve is easily adjustable.
• The flush valve has a silicone flapper.
• The toilet comes with a set of lag screws, plastic anchors and china protectors.
• The water spot measures 6 x 5 inches.
• A water level mark is applied to the overflow tube.

The rear outlet toilet is used by Saniflo to work with our macerators as a system. However, these toilets can also be installed by themselves. Or, you can order them from your Saniflo dealer, to replace old or damaged toilets.

Outside North America, the world is using this style toilet. In European high-rise apartment buildings for example, the toilet is connected to a 90-degree push fit elbow that connects into a 6-inch TY of a wet vented central stack. This type of connection eliminates the need to have a toilet drainpipe in the floor below, thereby saving ceiling height. In North America, a simple rubber connector (available from Fernco and Mission Rubber for example) will connect the toilet to a drain system.

Seats that fit our Saniflush toilets

The following Bemis toilet seats can be used with the Saniflush toilet:

• Round white, model: 70TK
• Elongated white, model: 1800TT
• Elongated biscuit, model: 1800 TT BISCUIT

A wooden seat for the Elongated toilet is also available: Choice Westport #1744 from Lowes, Model #144769.